Hi!
I am currently using a USB NI DAQ card (NI USB-6216 OEM) to monitor a frequency modulated output signal.
I am using a period measurement to measure the time between falling edges. My VI already gives some results but it yields only one measurement result after every loop execution even though I configured it to N sample. On the attached picture of the front panel it is clearly visible that several periods take place during one cycle but somehow I get only one result. Since the waveform was also recorded with the same DAQ card the hardware is not a limitation...
It would be a great help if anyone could give me a hint on what I am doing wrong.
If you have any questions, or something is unclear please don't hesitate to ask!
I attached only pictures of my VI since without the required hardware it is not possible to recreate the VI execution anyways. If you want me to post the VI nevertheless, I can do that too of course.
Front panel
Block diagram
Thank you!