Hi,
I am trying to use cntr0 in my USB 6251 Mass Term, but it seems that only Ch. A is getting pulses. I have checked the entire wiring from my quadrature encoder all the way through SCXI 139 connector and to the 6251 terminal. Everything is OK. When I connect my encoder to cntr1 it works fine, but I need two counters for two different tasks. I also tried to monitor PFI lines individually as digital inputs. I could check PFI 8 (Ch. A, cntr0), PFI 3 (Ch. A, cntr1) and PFI 11 (Ch. B, cntr1) successfully, but when I tried PFI 10 (Ch. B, cntr0) the Measurement and Automation Explorer gave me error that PFI 10 is reserved for another task! I don't run any other task.
Do I need to do some initializations or configurations to have access to cntr0 or PFI 10?
For reference:
Hardware:
USB 6251 Mass Term ---> 68-pin cable ----> SCXI 1349 -----> SCXI 1520
| ----> SCXI 1000-DC (Chassis)
| ----> 50-pin connector --(lines 33,34,36,41,42)---> quadrature encoder 1
|---(lines 24,35,37,47,48)---> quadrature encoder 2
M-Series and X-Series Breakout Pin Translations for the SCXI-1349 and SCXI-1346:
http://digital.ni.com/public.nsf/allkb/598A68C99373CF0886256F4600721018
- Javad