Hi all,
I have a question about using the counter to generate the pulse train. I don't have how to program it but I try the test panel in the MAX and I see it generates the pulse train at some rate and with some pulse duration. I am thinking if it is possible to generate only one pulse with given pulse duration at sometimes after I start the task? I have a code to output an analog waveform, the waveform lasting for 35ms. I wonder if it is possible to syncronize the output of the analog waveform as well as the counter such that at 12.5ms after the waveform output started, I send that single pulse from the counter port out. I have no idea how to do that, I am thinking to use a delay but it is hard to precisely control the time to exact 12.5ms.